SQF temperature monitoring and record requirements
By Vimal Bhaya, Founder and Lead Systems Architect · Last reviewed 16 November 2026
This is part 1 of 3 in Food safety standards and temperature records, a short guide to what SQF, BRCGS and FDA each ask of the temperature records for your cold rooms.
SQF asks for three things in a cold room: monitoring equipment at its warmest part, with a display that is easy to read; a written procedure that says how often you check and what you do when a reading is out; and records of the room temperatures. Whoever takes a reading signs it, and whoever reviews it signs and dates it.
The clause numbers here are Edition 9's. Audits use Edition 9 until 2 January 2027, when Edition 10 is expected to take over.
SQF is a certificate your customers ask for, not a law
SQF is a food safety certification. Sites get certified because a buyer asks for it, usually a retailer or a food service company. It is one of the schemes recognised by GFSI, alongside BRCGS and FSSC 22000, so many buyers accept any of them.
SQF has separate Codes for different kinds of site, such as food manufacturing and storage and distribution. The clause numbers on this page are from the Food Manufacturing Code, Edition 9. If a law also applies to you, such as FDA's preventive controls rule, you meet both. See 21 CFR 117 temperature records.
What the Code asks of a cold room
Clause 11.6.2 covers cold storage, freezing and chilling. Here is what it asks, as practitioners quote it. Check the wording against your own copy of the Code.
| Requirement | What it asks | Clause |
|---|---|---|
| Proof it works | Confirmation that freezing, chilling and cold storage perform as they should | 11.6.2.1 |
| Capacity | Enough refrigeration for the most product you expect, with time allowed for cleaning | 11.6.2.2 |
| A written procedure | How you monitor temperatures, how often you check, and what you do if a reading is out of specification | 11.6.2.3 |
| Where the monitor goes | Temperature monitoring equipment placed to monitor the warmest part of the room | 11.6.2.3 |
| A display | A temperature display that is easy to read and easy to get to | 11.6.2.3 |
| Records | Records of frozen, cold and chilled storage room temperatures | 11.6.2.3 |
| Calibration | Documented methods and responsibility for calibrating the equipment used for monitoring | 11.2.3 |
The warmest part of the room is found, not guessed
A cold room is not one temperature. It is warmer near the door, high up, and wherever the air cannot reach. The monitor has to sit at the warmest spot, so you need to know where that is.
A temperature mapping study finds it. You place loggers through the room for a set time and read where it runs warm. See temperature mapping for food cold storage, and where to put a sensor in a walk-in for a smaller box.
What a good SQF record looks like
SQFI's own guidance on records spells out what an auditor expects:
- The person who checks signs and dates each entry, or authorises it electronically.
- The person who reviews signs and dates each record they review.
- A written procedure says who fills in, checks and stores each record, and everyone involved knows their part.
- Records are made at the time, and are clear, legible and accurate.
- Mistakes on paper are crossed out with one line, corrected and initialled. No correction fluid.
- Electronic records are fine, with security, electronic signatures for whoever checks and reviews, and a way to review on screen.
A reading that was out of range needs its corrective action written beside it: what went wrong, what you did, and what happened to the product. See automated logs and corrective actions for one filled in.
How long to keep SQF records
SQF sets no fixed period. A customer, a law or your insurer may set one. Otherwise, SQFI's guidance says to keep records for the commercial shelf life of the product. For short shelf-life products, keep them until after your next recertification audit, at least.
If FDA's preventive controls rule also applies to you, its 2 years is the longer rule for most chilled food. More in how long to keep temperature logs.
What the auditor will look at
SQFI lists what an auditor can check on records, in three ways:
- Records: your records procedure, and a retention list that says how long each record is kept.
- Interviews: your SQF practitioner, whoever controls documents, and the people who take the readings. Expect questions on their training, and what they do when they make a recording mistake.
- Observation: staff filling in and checking records, and where paper or electronic records are kept.
Edition 10: what changes, and when
SQFI published Edition 10 in March 2026. Audits switch to it from 2 January 2027, if GFSI's review finishes on time. An audit before that date uses Edition 9. A surveillance audit after that date, from an Edition 9 audit, still uses Edition 9.
Edition 10 may number its clauses differently. Before your first Edition 10 audit, find where the cold storage and records clauses sit in the new Code.
Where TemperatureWise fits, and what stays yours
| SQF asks for | TemperatureWise | Still yours |
|---|---|---|
| Monitoring at the warmest part of the room | A wireless sensor at the spot your mapping found, read every 15 minutes | Finding the spot. A mapping study does it |
| Action when a reading is out | Alerts by email, then text and phone call, until someone answers. The corrective action is noted in the app beside the readings | Writing the procedure, and doing what it says |
| Records of room temperatures | Every reading kept indefinitely, and exported as a spreadsheet file | Reviewing the records, and signing the review |
| A display that is easy to read | The reading in the app, on any phone | The room's own thermometer by the door, for anyone without the app |
| Calibration | NIST-traceable calibration certificates, quoted on request | Your calibration schedule |
The full specification, from accuracy to encryption, is on TemperatureWise for IT and procurement.
The free cold room temperature records audit checklist below puts SQF, BRCGS and FDA side by side on one page, with a checklist to run before the audit.
