Refrigerator temperature mapping

Refrigerator temperature mapping, for every fridge from under-counter to double-door

We ship calibrated sensors for your fridge, and you place them with us on a video call: at the corners, the center and one outside. The readings reach us live, and the signed report comes 2 business days after the 3-day study.

  • 4 to 19 sensors
  • 3-day study
  • No site visit
  • Report in 2 business days
The refrigerator mapping packages side by side, each fridge seen through its door with glowing sensors at the corners and the center: a compact fridge with 4 sensors, a single-door upright with 10 and a double-door fridge with 19, each with its posted price.
From $350for an under-counter fridge
3 daysevery cycle caught more than once
2 business daysto the signed report

How it works

From your refrigerator to a signed report, live

Calibrated sensors at the corners, the center and outside a fridge send their readings by radio to a gateway. The gateway sends them to Renergy live, while the study runs, and the report fills in as they arrive and is signed when the study ends.
Calibrated sensorsCertificates in the report
Own cellular linkNothing joins your network. No IT headache.
Signed by a certified engineerA Renergy engineer with career expertise in cold chain logistics

Packages

Every price, posted. Pick your unit.

A compact under-counter fridge seen through its door, with sensors at two opposite corners and the center, and one outside.

Compact fridge

Under-counter or bench-top

4 sensors · 3 days

$350

Book
A single-door upright fridge seen through its door, with sensors at all eight corners and the center, and one outside.

Single-door fridge

A single-door upright

10 sensors · 3 days

$850

Book
A double-door fridge seen through its doors, with sensors at the eight corners and the center of each side, and one outside.

Double-door fridge

Or a walk-in up to about 10 ft (3 m) a side

19 sensors · 3 days

$1,600

Book

US dollars, before tax, for a remote study. Shipping at the carrier's rate, no markup. On-site service and -80°C (-112°F) freezers are quoted separately.

Keep some of the sensors after the study, and you have continuous monitoring for $250 a sensor a year.

See TemperatureWise

Ordering

Four steps, no site visit

  1. Three package cards with their prices. The single-door fridge is picked.

    Pick a package

    By unit size, with a date.

  2. A video call with two people, and the study protocol beside it, every line checked and approved.

    Approve the protocol

    On a call, before we ship.

  3. A fridge with sensors at its corners, and a phone on a video call confirming that spot 7 looks right.

    Place sensors on video

    We check each spot with you.

  4. The signed report with every section checked, and the sensor kit boxed up to go back.

    Get the signed report

    2 business days after the study.

Need more hands-on help? We also offer assisted installation, up to full white-glove service, quoted separately.

Talk with us

The report

The report fills in while the study runs

A sample temperature mapping report for a single-door vaccine fridge, filling in as the study runs. Each step turns to done: protocol, sensor placement, calibration certificates, the door-open test, the power-off test, the warm and cold spots, where the permanent probe goes, the mean kinetic temperature and raw data, and the review and signature by a certified engineer. Beside them, a picture of each step: the sensors reporting, the door held open, the power cut, the warmest and coldest corners, a pin where the permanent probe goes, the results sheet with its data file, and the signed report with its seal.

The method

How a refrigerator temperature mapping study runs

Where the 4 to 19 sensors go

A compact fridge takes 4: two opposite corners, the center and one outside for the room air. A single-door upright takes 10: all eight corners, the center and one outside. A double-door takes 19: the corners and the center of each side, and one outside.

3 days, so every cycle repeats

A fridge runs in cycles: the compressor starts and stops, and many fridges defrost on a timer. Three days catches each cycle more than once, so the map can tell a normal swing from a warm spot. Pharmacy fridge mapping often runs over 48 hours.

Empty, full or both

A loaded fridge holds temperature differently from an empty one. The protocol says which you want mapped. Health Canada's guidance for drug storage maps fridges both ways.

The door test sets how long a door may stand open

With your agreement, the protocol holds the door open for a set time. The map shows how long the fridge takes to recover, which tells staff how long a door may stand open while they load.

The power test shows how long you have

The protocol can also switch the fridge off for a set time. The map shows how long it holds in a power cut before product is at risk.

What the report holds

The lowest, highest and average reading at every sensor, the warm and cold spots, the door and power results, the mean kinetic temperature, any reading outside the range, where the permanent probe should go, the calibration certificates and the raw data. A certified Renergy engineer reviews and signs it.

Who asks

Who asks for a fridge map

Hospitals and blood banks

AABB expects each blood fridge to be validated before use. Pharmacy and lab fridges are mapped when an accreditor, a trial sponsor or a new unit asks.

Hospital temperature mapping

Vaccine storage

The CDC puts a vaccine fridge's buffered probe in the center of the unit, among the vaccines. A map shows whether the center reads like the rest of the fridge.

CDC monitoring equipment

Canada

Health Canada's GUI-0069 asks drug licence holders to map fridges empty and full, long enough to catch the compressor and defrost cycles.

GUI-0069

Common questions

What is refrigerator temperature mapping?

A study that places 4 to 19 calibrated sensors through a fridge, by its size, for 3 days, to find its warm and cold spots and how fast it recovers after the door opens. It shows where product is safe and where the permanent probe should go.

How much does fridge temperature mapping cost?

$350 for an under-counter fridge, $850 for a single-door upright and $1,600 for a double-door, in US dollars, before tax and shipping. A larger walk-in takes more sensors, and is priced the same way.

How many sensors does fridge mapping need?

4 for a compact fridge, 10 for a single-door upright and 19 for a double-door, each count including one outside the unit for the room air.

How long does refrigerator temperature mapping take?

3 days in the unit, which catches the compressor and defrost cycles more than once. The signed report comes 2 business days after the study ends.

Should a fridge be mapped empty or full?

Both, where you can, because a loaded fridge holds temperature differently. The protocol says which you want, and Health Canada's guidance for drug storage maps fridges both ways.

Where should the permanent fridge probe go?

Where the map shows it reads what your product feels. For vaccines, the CDC puts a buffered probe in the center of the unit, and the report shows whether the center reads like the rest of the fridge.

Can a fridge be mapped remotely?

Yes, it is our default. We ship the sensors with a placement map, and you place them while we check each spot on a video call. The gateway sends the readings over its own cellular link, so nothing joins your network.

Can the sensors stay after the study?

Yes. Keep as many as you need and they become continuous monitoring with TemperatureWise, at $250 a sensor a year.

How often should a fridge be mapped?

WHO guidance maps a space before it is first used, after any significant change, and on a cycle such as every 3 years.

Book a study, or ask what yours would cost

Tell us the unit and the date.