TemperatureWise solutions

Temperature monitoring solutions, by operation and by equipment

TemperatureWise is a temperature monitoring and alerting system: a wireless sensor in each fridge, freezer, walk-in or room, a reading every 5 or 15 minutes, and alerts that learn each unit's own pattern. Each page below is written for one kind of operation or one kind of equipment, with its own failures, rules and prices. Renergy also maps fridges, freezers, cold rooms, warehouses and vehicles.

Inside a loaded walk-in cooler: wire shelving stacked with labelled food containers, a sheet pan rack, the evaporator fans above, and a small white TemperatureWise sensor clipped to a shelving upright, marked with a red outline.
$250per sensor per year, dashboard and alerts included

How the pages differ

Three kinds of page, one system

By operation

Cold storage, kitchens, stores and pharmacies each fail in their own way. Each page covers the three failures that operation sees most, the daily ups and downs that are not failures, the rules its inspector checks, and a priced example.

By equipment

One kind of unit, wherever it stands: fridges, freezers, walk-ins and warehouses. For a buyer who knows the box better than the industry it sits in.

Temperature mapping

A study of where a space runs warm and cold, for an auditor or a program that asks for one. Every package and price is posted, and the map shows where the monitoring sensors should go.

Temperature monitoring and alerting

Pick your operation or your equipment

Each page carries a worked price for a real-sized site.

Pricing

What TemperatureWise costs

$250 per sensor per year, about $21 a sensor a month, plus one-time hardware: a sensor at $25 or $200 and one gateway or hub per site at $100 to $450. The dashboard, alerts and setup cost nothing extra.

Common questions

What is a temperature monitoring solution?

A sensor in each fridge, freezer or room that records the temperature around the clock, sends it to the cloud, and alerts someone when a unit goes wrong. TemperatureWise also learns each unit's normal day, so the rush and the defrosts are not alarms, and it says what has changed.

Which page should I read?

If you run one kind of operation, read its page: the failures and rules there are the ones you will meet. If you are buying for one kind of unit across several sites, read the equipment page. If an auditor or a program has asked for a temperature map, read the mapping pages.

How much does temperature monitoring cost?

$250 per sensor per year, about $21 a sensor a month, plus one-time hardware: a sensor at $25 or $200 and one gateway or hub per site at $100 to $450. A small restaurant with three reach-ins pays $175 up front and $750 a year. Every price is on the pricing page.

Is temperature mapping the same as temperature monitoring?

No. Mapping is a study: many loggers for a few days, to find where a space runs warm and cold. Monitoring is the sensors that stay, read every 5 or 15 minutes, with alerts. The map tells you where to put the monitoring sensors.

Not sure which page is yours?

Tell us what you run and what you store. We will point you at the right page, or put a sensor in your coldest room and show you what it has been doing.

Sources for every figure on this page
  1. Monitoring prices: the TemperatureWise price list of 1 September 2026, as on the pricing page
  2. Mapping prices: the package list on temperature mapping
  3. Each card's line and price: the page it links to

Last reviewed 16 November 2026