TemperatureWise for warehouses

Warehouse temperature monitoring system

Know a warehouse room is drifting before a pallet is at risk. TemperatureWise is a warehouse temperature monitoring system: long-range wireless sensors in each freezer hall, cold room and ambient zone, one gateway for the site, a reading every 15 minutes kept for audits, and alerts that climb until someone answers. Six sensors with cellular and battery backup cost $1,900 up front and $1,550 a year.

  • Freezer halls and cold rooms
  • Ambient and controlled-room stores
  • 3PLs and distributors
  • Multi-site networks
A long aisle in a cold storage warehouse, with pallets of wrapped frozen product on racking several levels high on both sides and a worker in a high-visibility vest walking down the middle.
One gatewayreaches across the site, through racking and freezer walls
$1,900 up frontand $1,550 a year, for six sensors with cellular and battery backupTemperatureWise price list
27 daysof warning before a $450,000 freezer repair at a distribution centerPhiladelphia, 2025
Every 15 minutesa reading from each sensor, kept indefinitely for auditsTemperatureWise sensor specification
An animated drawing of how TemperatureWise readings travel. Inside the cold box, a sensor clipped to a shelf takes a reading and sends it by radio through the wall, with nothing drilled, to the gateway on site. The gateway passes it over the internet or cellular to the Renergy cloud, where AI watches every reading, and the cloud puts it in the app as a new point on the chart. Green readings travel one after another. Then one reading comes in too warm and turns red: the cloud flags it, the app plots it above the line, and an alert goes to a phone, first as an email, then a text, then a phone call, until someone answers.

What you get

Four things TemperatureWise does as a warehouse temperature monitoring system

The TemperatureWise app showing a portfolio with a receiving dock, a blast cell and a freezer hall, each with its latest reading.Illustrative data

Every room, on your phone

See every freezer hall, cold room and ambient zone from anywhere, with the latest reading and the trend. Each alert names the room.

The four links between a freezer sensor and your phone. The sensor runs on its own battery and keeps reading in a power cut. The gateway and your internet run on mains and go down. The cloud and the mobile network keep running, so the alert is raised there.

A power cut on a weekend still reaches you

The sensors run on their own batteries. If a power cut takes down the gateway or your internet, the TemperatureWise cloud notices the silence and alerts you.

What happens when the power goes out
The TemperatureWise app showing a temperature trend chart for one unit over a 24 hour period.Illustrative data

The log fills itself in

Every reading is kept, so the record covers the nights and the days you were closed, not only the times somebody wrote a number down.

TemperatureWise alert settings with three steps: email, then a text message, then a phone call, each after a delay.Illustrative data

Alerts climb until someone answers

Email, then a text, then a call, to up to three people for each sensor. A night-shift fault reaches the supervisor, then the manager.

Where it goes wrong

Three warehouse failures worth an alert, and the daily ups and downs that aren't

A warehouse moves its temperatures with every shift, load and season. The job is to tell those from the start of a failure, and to wake someone only for the second.

Two views of a freezer's cooling coil. On the left the coil is clear and air flows through it. On the right, wet air from the dock has frozen onto the coil and a failed defrost has left the ice there, so the air stops at the coil.
From the data

Caught 53 hours before the peak in Philadelphia, April 2025

A failed defrost or a busy dock door ices the coil

Wet air from the dock freezes onto the cooling coil, and a failed defrost leaves it there. Air stops moving through the coil, and each day ends a little warmer.

How fast
2 to 5 days
What the log shows
The coldest point of each day steps up
How to tell
Humidity rises before the temperature does
The refrigeration loop: the coil in the freezer, the compressor, the condenser outside and the expansion valve, joined by pipes. A slow leak at a joint means less refrigerant each week, longer run times and a warmer daily low.
From the data

Caught 27 days before the first repair in Philadelphia, June 2025

A slow refrigerant leak takes weeks to show

Each week there is a little less refrigerant to carry heat out. The room runs longer, and its coldest point of the day creeps up and does not come back.

How fast
1 to 8 weeks
What the log shows
The daily low creeps up
How to tell
Run times grow too. A technician confirms with pressures
A row of four outdoor condensing units on a winter night at -4°F (-20°C), each piped to its own cold room inside. On the third unit the head-pressure control has failed, so its room runs warm on the coldest nights and recovers in the afternoon.
How it fails

An outdoor unit's winter control fails

Many warehouses cool each room with its own condensing unit outside. In a cold winter, a failed head-pressure control starves that room of cooling on the coldest nights, while the rooms beside it hold. It is a much bigger problem in Canada and the northern US than in the south.

How fast
Overnight, in cold weather
What the log shows
One room warm on cold nights, fine in the afternoon
How to tell
It follows the outdoor temperature, not production

A threshold alarm goes off for these every day. TemperatureWise learns them in its first week.

Shift traffic, incoming loads, defrosts and the afternoon heat move a warehouse's temperatures every day. None of them is a failure.

A threshold alarm

Sounds whenever a room crosses one fixed line. A busy shift or a defrost crosses it, so it goes off every day and staff learn to ignore it. More in why temperature alarms cry wolf.

TemperatureWise

Learns each room's normal pattern in its first week: its shifts, its loads, its defrosts and how it follows the weather. It stays quiet for the routine and alerts when a room stops behaving like itself, like the three failures above.

Two views of a freezer doorway. During a shift the strip curtain is tied back and pallet jacks go in and out, bringing warm, wet air in with every pallet, so the room runs warmer. After the shift the curtain is down, the doors are shut and the room recovers.
Shift traffic Doors and pallet jacks warm the rooms on shift. They recover once the doors stay shut.
Three boxes in a row: production, the shock freezer and the holding freezer. Product moves from one to the next. Each load warms the holding freezer a little, and the room then pulls back down. That is normal, and TemperatureWise learns how long each room takes to recover.
Incoming loads Each load warms the room for a while, then the room pulls it back down.
Line chart of a walk-in freezer on 11 April 2025. It runs near -0.4°F (-18°C) all morning. At midday a scheduled defrost lifts it to a peak of 22.1°F (-5.5°C), crossing a dashed alarm line at 10°F (-12°C) for 55 minutes, then it drops back to normal by early afternoon.
Defrosts A defrost warms the air for a short time, several times a day. The stock stays cold.
An older warehouse on a hot afternoon. Heat comes in through worn insulation in the walls and roof, and the refrigeration unit outside was added years later. TemperatureWise sensors and a gateway are added inside without touching the old system.
Hot afternoons An older building warms with the afternoon heat and recovers overnight.

Pricing and payback

A warehouse with six sensors costs $1,900 up front and $1,550 a year

A freezer hall, a cooler and an ambient zone, two sensors each

ItemOncePer year
6 LoRa sensors at $200$1,200
Gateway for a larger site$450
Cellular connection$125$50
Battery backup$125
Monitoring, 6 sensors at $250$1,500
Total$1,900$1,550

Cellular and battery backup keep the alerts and the record going through a power cut. One gateway reaches across several buildings, so a bigger site mostly adds sensors, at $200 once and $250 a year each. Price list of 1 September 2026.

All prices, and examples for many sites

One saved freezer room pays for decades

At a Philadelphia distribution center, TemperatureWise warned 27 days before a $450,000 freezer repair, in time to move the stock to a reefer first. A year of monitoring for the warehouse above is $1,550.

Monitoring is $250 per sensor per year, about $21 a sensor a month, and it stays the same however much stock is in the room.

The $450,000 is the stock value in the dual-system freezer case study. Your own stock value goes in the calculator below.

Want a detailed calculation for your own site? The full calculator on the TemperatureWise page takes your rooms, sensors and connection.

Open the full calculator

How it works

Three steps, nothing drilled, no shutdown

  1. We plan it from your floor plan

    TemperatureWise marks where each sensor and the gateway go before anything ships. If the space has been mapped, the sensors go where the map found the warmest and coldest spots.

  2. You place the sensors and plug in the gateway

    Magnet, adhesive pad or one screw. The gateway goes into an ordinary socket.

  3. It learns each room in the first week

    TemperatureWise learns each room's shifts and defrosts and sets alerts around them, so a normal day is not an alarm.

The Renergy gateway, a white desktop unit with a whip antenna.
In the officeThe gateway sits beside the network cabinet, plugged into an ordinary socket.
LoRa radio across the site, through racking, walls and freezer panels. Nothing drilled.
A TemperatureWise sensor clipped to the upright of a pallet rack inside a loaded freezer, covered in frost.
In the freezer hallSensors go on racking uprights at the height the product sits, not in the coil's cold air.
Every 15 minutesReadings kept indefinitely
Rated to -40°F (-40°C)Battery lasts 5 to 8 years
Temperature and humidityFrom one sensor

The rules

The records US and Canadian rules ask a warehouse to keep

US · 21 CFR 117.206

What they want. A warehouse storing packaged food that needs temperature control monitors the temperature, acts when it goes wrong, and keeps records.

TemperatureWise: A reading every 15 minutes from every room, alerts that climb until someone answers, and the corrective action staff record against each alert.

Read 21 CFR 117.206

US · 21 CFR 205.50

What they want. Wholesale distributors store prescription drugs as the labeling or the USP requires, with temperature records that document it.

TemperatureWise: Temperature and humidity from one sensor, kept indefinitely.

Read 21 CFR 205.50

Canada · Health Canada GUI-0069

What they want. Drug storage areas are mapped to find the warmest and coldest spots, and monitored there.

TemperatureWise: Sensors placed where the map found the extremes, each read every 15 minutes.

Read GUI-0069

TemperatureWise produces the record. The review and sign-off stay with you.

Common questions

How much does a warehouse temperature monitoring system cost?

$1,900 up front and $1,550 a year for six sensors with cellular and battery backup: $200 a sensor, a $450 gateway for a larger site, $125 for cellular plus $50 a year, $125 for the backup, and $250 per sensor per year. The dashboard, alerts and setup cost nothing extra.

How many sensors does a warehouse need?

One for a small room, two for a mid-sized room and three for a large one, at the heights the product sits. A temperature map of the space shows where the warmest and coldest spots are, and that is where the sensors go. More in temperature mapping for warehouses.

Will one gateway cover a large warehouse?

Usually. TemperatureWise's LoRa radio reaches across several buildings from one gateway, through racking, walls and freezer panels. The walkthrough before install confirms it for your site.

Does it record humidity too?

Yes. One sensor reports both temperature and humidity. In a freezer, humidity also shows a failing door seal or an icing coil before the temperature moves. More on temperature and humidity monitoring.

Can it feed our building management system?

Yes. With the BACnet gateway the readings appear as ordinary BACnet points in your BMS or BAS, alongside everything else your facilities team already watches. More for IT teams on TemperatureWise for IT and procurement.

What is the difference between temperature mapping and monitoring?

Mapping is a study: many loggers for a week or so, to find where the space runs warm and cold. Monitoring is the sensors that stay, read every 15 minutes, with alerts. The map tells you where to put the monitoring sensors.

See what your coldest room has been doing

Send us 30 days of readings from one room, or let us put a sensor in it. We will show you what it was doing before anyone noticed. No purchase needed.

Sources for every figure on this page
  1. Prices, sensor specifications and alert steps: the TemperatureWise price list of 1 September 2026. Gateway range, humidity and BACnet: the specification table on the TemperatureWise page
  2. The iced coil: the Philadelphia freezer case study. The refrigerant leak and the $450,000: the dual-system freezer case study
  3. The winter control failure and the daily patterns: Renergy's internal refrigeration failure-mode reference, September 2026, as on the food manufacturing page
  4. US: 21 CFR 117.206 and 21 CFR 205.50. Canada: Health Canada GUI-0069
  5. The three case studies at the foot of the page: the Philadelphia freezer, the dual-system freezer and the Mississauga stationary reefer

Last reviewed 16 November 2026